Quality is life, service is the tenet
發布時間: 2024-08-14
產品型號: M-200
廠商性質: 生產廠家
所 在 地: 北京市海淀區上地科技園上地十街1號
產品特點: 絕緣材質摩擦磨損試驗儀北京哪家符合標準:GB/T 3960-1983 塑料滑動摩擦磨損試驗方法 GB/T 9141.8-1999 柔性石墨板材滑動摩擦系數測試方法
絕緣材質摩擦磨損試驗儀北京哪家
plastic sliding friction and wear testing machine
型號:M-200
Model: M-200
一、 絕緣材質摩擦磨損試驗儀北京哪家特點:
First, the characteristics of:
適用于塑料制品及橡膠制品或其他復合材料的滑動摩擦,摩損性能測試。也可對試驗中試樣的摩擦力、摩擦系數和摩損量進行測定。
制造標準:GB3960 塑料滑動摩擦磨損試驗方法
Suitable for sliding friction, friction and wear properties of plastics and rubber or other composites. The friction coefficient and the friction coefficient and the friction coefficient of the test specimens can be measured.
制造標準:GB3960 塑料滑動摩擦磨損試驗方法
Manufacturing standard: GB3960 plastic sliding friction and wear test method
二、絕緣材質摩擦磨損試驗儀北京哪家主要適用范圍及功能
Two, the main scope of application and function
本儀器是按照GB3960設計并制造。適用于塑料制品及橡膠制品或其他復合材料的滑動摩擦,摩損性能測試。也可對試驗中試樣的摩擦力、摩擦系數和摩損量進行測定。本機采用16位單片機電子處理系統,使得本儀器各項測試指標精度非常高。由于集成程度很高,所以設備本身的穩定性*,本機具有一次設置,全自動運行,實驗結束后自動停機,并檢測摩損程度。是各個科研單位,大學,企業實驗室的*檢測設備。
This instrument is designed and manufactured in accordance with GB3960. Suitable for sliding friction, friction and wear properties of plastics and rubber or other composites. The friction coefficient and the friction coefficient and the friction coefficient of the test specimens can be measured. This machine adopts 16 bit single chip microcomputer electronic processing system, makes this instrument each test target precision is very high. Due to the high degree of integration, the stability of the equipment itself is excellent, the machine has a set, automatic operation, automatic shutdown after the end of the experiment, and detect the degree of friction. It is a necessary testing equipment for all scientific research institutes, universities and enterprises.
三、絕緣材質摩擦磨損試驗儀北京哪家功能特點:
Three, functional characteristics:
1、試樣尺寸: 30mm*7mm*6mm±0.1 mm
2、轉動速度: 0-200轉/分 連續可調
3、負 荷: 196N ± 0.2%(可擴充到392N)
4、摩擦環尺寸:¢40×10mm 倒角0.5×45°外圓表面與內圓同心度偏差小于0.01
5、摩擦力矩: 0--4N·m ±0.5%
6、計 數 器: 0-9999小時
7、砝碼重量:4KG砝碼一件,1KG砝碼4件,可實現重量疊加功能。
1, sample size: 30mm*7mm*6mm + 0.1 mm
2、轉動速度: 0-200轉/分 連續可調
2, the rotation speed: 0-200 transfer / sub continuous adjustable
3、負 荷: 196N ± 0.2%(可擴充到392N)
3, load: 196N + 0.2% (can be extended to 392N)
4、摩擦環尺寸:¢40×10mm 倒角0.5×45°外圓表面與內圓同心度偏差小于0.01
4, the size of the friction ring: 40 * 10mm 0.5 * 45 degree chamfer surface of the outer circle and inner circle concentricity deviation is less than 0.01
5、摩擦力矩: 0--4N•m ±0.5%
5, friction torque: M / 0--4N + 0.5%
6、計 數 器: 0-9999小時
6, counter: 0-9999 hours
7、砝碼重量:4KG砝碼一件,1KG砝碼4件,可實現重量疊加功能。
7, weight weight: 4KG weight of one, 1KG weight 4 pieces, can achieve weight superposition function.
四、絕緣材質摩擦磨損試驗儀北京哪家精度:
1、速度精度:1%
2、負荷精度:0.5%
3、摩擦力矩精度:1%
4、計數器精度:1S
5、傳感器測量精度:1% FS
Four, accuracy:
1、速度精度:1%
1, speed accuracy: 1%
2、負荷精度:0.5%
2, load accuracy: 0.5%
3、摩擦力矩精度:1%
3, friction torque accuracy: 1%
4、計數器精度:1S
4, counter accuracy: 1S
5、傳感器測量精度:1% FS
5, sensor measurement accuracy: 1% FS
五、 絕緣材質摩擦磨損試驗儀北京哪家主要配置:
1、主機一臺
2、高精度扭矩傳感器一只
3、彩晶顯示控制系統箱一臺
4、4Kg砝碼兩件(備用一套)
5、標準磨擦環四件(備用兩件)
6、臺式微型打印機一臺
7、產品使用說明書一份
8、產品合格證
9、產品裝箱單一份
10、整機重量:約45公斤
Five, the main configuration:
1、主機一臺
1, a host
2、高精度扭矩傳感器一只
2, high precision torque sensor
3、彩晶顯示控制系統箱一臺
3, color crystal display control system box
4、4Kg砝碼兩件(備用一套)
4, 4Kg weight two (spare one set)
5、標準磨擦環四件(備用兩件)
5, standard friction ring four (spare two)
6、臺式微型打印機一臺
6, desktop micro printer a
7、產品使用說明書一份
7, a copy of the instructions of the product
8、產品合格證
8, product qualification certificate
9、產品裝箱單一份
9, product packing list
10、整機重量:約45公斤
10, the weight of the whole machine: about 45 kg
六、 絕緣材質摩擦磨損試驗儀北京哪家主要技術規格:
1、zui大試驗力:2000N
2、試驗力示值相對誤差:在滿量程的10%以上,不超過±2%
3、試驗力示值重復性相對誤差:在滿量程的10%以上,不超過2%
4、摩擦力矩測量范圍:0-15N.m
5、摩擦力矩示值相對誤差: 在滿量程的10%以上,不超過±3%
6、摩擦力矩示值重復性相對誤差:在滿量程的10%以上,不超過3%
7、下試樣軸轉速:400,200r/min 可選擇(無級調速)
8、上試樣軸轉速:360,180r/min
9、上試樣軸向zui大移動距離:±4mm
10、時間控制范圍:數顯控制1s-9999min
1 1、轉數控制范圍:數顯控制 1-999999
1 2、曲線記錄及數據處理:由HX計算機實現對各個參數的測量顯示及數據處理,可時實顯示時間-摩擦力矩等多種曲線
Six, the main technical specifications:
1、zui大試驗力:2000N
1, the maximum test force: 2000N
2、試驗力示值相對誤差:在滿量程的10%以上,不超過±2%
2, the experimental value of the relative error: in the full range of more than 10%, not more than 2%
3、試驗力示值重復性相對誤差:在滿量程的10%以上,不超過2%
3, test force repeatability of the relative error: in the full range of more than 10%, not more than 2%
4、摩擦力矩測量范圍:0-15N.m
4, friction torque measurement range: 0-15N.m
5、摩擦力矩示值相對誤差: 在滿量程的10%以上,不超過±3%
5, the value of the relative error of the friction torque: in the full range of more than 10%, not more than 3%
6、摩擦力矩示值重復性相對誤差:在滿量程的10%以上,不超過3%
6, the friction torque repeatability of the relative error: in the full range of more than 10%, not more than 3%
7、下試樣軸轉速:400,200r/min 可選擇(無級調速)
7, under the specimen shaft speed: 400200r/min can choose (stepless speed regulation)
8、上試樣軸轉速:360,180r/min
8, on the sample shaft speed: 360180r/min
9、上試樣軸向zui大移動距離:±4mm
9. The maximum moving distance of the sample on the sample is: + 4mm
10、時間控制范圍:數顯控制1s-9999min
10, time control range: digital control 1s-9999min
1 1、轉數控制范圍:數顯控制 1-999999
11, speed control: digital control 1-999999
1 2、曲線記錄及數據處理:由HX計算機實現對各個參數的測量顯示及數據處理,可時實顯示時間-摩擦力矩等多種曲線
12, curve records and data processing: the HX special computer to achieve the measurement of the various parameters of the display and data processing, can be real time display time - friction torque and other curves
北京北廣精儀生產主要產品:
產品名稱 | 產品型號 | 備注 | 使用標準 |
TOC總有機碳分析儀 | BC-40A | 進口探頭 |
|
完整性分析儀 | BQS-19 | 液晶顯示 |
|
電壓擊穿試驗儀 | BDJC-10-100KV | 計算機控制 | GB/T1408-2006、ASTM D149 |
體積表面電阻率測試儀 | BEST-121 | 液晶顯示 | GB/T1410-2006、ASTM D257-99 |
滑動摩擦磨損試驗機 | M-200 | 橡膠塑料,復合材料 | GB/T3960-1983 |
萬能拉力試驗機 | BWN | 金屬,非金屬材料 | GB/T6344-1996、GB/T10808-2006、ISO8067:1989 |
介電常數介質損耗測試儀 | GDAT-A | 固體液體材料 | GB/T1409-2006 |
熱變形維卡溫度儀 | BWK-300 | 計算機 | GB/T1633-2000、GB/T1633-2000、GB/T1634-2004、GB8802 |
塑料球壓痕硬度計 | BQ-96 | 液晶 |
|
熔體流動速率測定儀 | BRT-400Z | 計算機 |
|
海綿泡沫壓陷硬度測定儀 | HMYX-2000 | 計算機 | GB/10802、 GB10807-2006 |
海綿泡沫落球回彈儀 | HMLQ-500 | 液晶 | GB/T6670-2008 ISO8307 ASTM D3574 ISO8307 |
海綿泡沫疲勞沖擊測定儀 | HMPL-2000 | 液晶 | GB/T 18941 ISO 3385 |
海綿拉伸強度試驗機 | HMLS-1000 | 液晶 |
|
海綿壓縮*變形試驗機 | HMYS-1 | 恒溫箱 | GB/T 6669-2001 |
海綿泡沫切割機 | HMQG-500 | 機械 |
|
水平垂直燃燒試驗儀 | BRS-3 | 計算機 |
|
耐電弧試驗儀 | BDH-20KV | 計算機 | GB1411-2002 |
漏電起痕試驗儀 | BLD-600 | 高壓,低壓 | IEC60695、 、GB4207/IEC60112 |
針焰試驗儀 | BY-A | 國標 |
|
灼熱絲試驗儀 | BR-A | 國標 |
|
橡膠塑料低溫脆性沖擊試驗機 | BWD系類 | 單式樣,多試樣 |
|
簡支梁沖擊試驗機 | BJZL-A | 指針,數顯,觸摸屏 |
|
懸臂梁沖擊試驗機 | BXBL-A | 指針,數顯,觸摸屏 |
|
簡支梁懸臂梁組合沖擊試驗機 | BJX-A | 指針,數顯,觸摸屏 |
|
落球沖擊試驗機 | BLC-2000 | 500-2000mm | GBT11548 |
落鏢沖擊試驗機 | BLB- | 500-2000mm |
|
擺錘薄膜沖擊試驗機 | BCM-03 | 薄膜 |
|
萬能制樣機 | BWN-A | 橡膠塑料 |
|
缺口制樣機 | BQK-A | 自動,手動 |
|
啞鈴制樣機 | BYL-A | 自動,手動 |
|
環境試驗箱系類 | BLH | 多窗口數碼顯示 |
|
| |||
氧指數、導熱系數儀 | BYZS-C | 計算機 |
|
產品相關關鍵字: 塑料滑動摩擦磨損 滑動摩擦磨損試驗機 摩擦磨損試驗機
Plastic sliding friction and wear sliding friction and wear testing machine friction and wear testing machine